Wireless networks are accessible to anyone within the router’s transmission radius. This makes them vulnerable to attacks. Hotspots are available in public places such as airports, restaurants, parks, etc.

• Sitecom Wifi Password Cracker
• Sitecom Wifi Password Crackers
• Wifi Password Crack Free Download

Password: SITECOM: ALL WIFI ROUTERS. Because the longer a password is the more time it takes to crack it, you should never use a password that’s not at least 8. Crack password using hashcat: Install hashcat: sudo apt install hashcat. Check is everything oky?: hashcat -I to use hashcat you need gpu. Crack password: hashcat -m 2500 wpacrack.hccapx dictionary.txt. Dictionary.txt - word list (suppose) wpacrack.hccapx is the handshake file; Bruteforce: Example (bruteforce for length 8 password using 0. Here is a complete list of Sitecom router passwords and usernames. Find Sitecom router passwords and usernames using this router password list for Sitecom routers. Unboxing & installation of Sitecom WLR-6100 Wi-Fi Router X6 With this wireless router you can create a blazing-fast wireless network and share Internet, files and devices within your home network. The router provides wireless speeds of up to 450 Mbps on the 2.4 GHz frequency and up to 450 Mbps on the 5 GHz frequency.

In this tutorial, we will introduce you to common techniques used to exploit weaknesses in wireless network security implementations. We will also look at some of the countermeasures you can put in place to protect against such attacks.

Topics covered in this How to Hack WiFi Tutorial

What is a wireless network?

A wireless network is a network that uses radio waves to link computers and other devices together. The implementation is done at the Layer 1 (physical layer) of the OSI model.

How to access a wireless network?

You will need a wireless network enabled device such as a laptop, tablet, smartphones, etc. You will also need to be within the transmission radius of a wireless network access point. Most devices (if the wireless network option is turned on) will provide you with a list of available networks. If the network is not password protected, then you just have to click on connect. If it is password protected, then you will need the password to gain access.

Wireless Network Authentication

Since the network is easily accessible to everyone with a wireless network enabled device, most networks are password protected. Let’s look at some of the most commonly used authentication techniques.

WEP

WEP is the acronym for Wired Equivalent Privacy. It was developed for IEEE 802.11 WLAN standards. Its goal was to provide the privacy equivalent to that provided by wired networks. WEP works by encrypting the data been transmitted over the network to keep it safe from eavesdropping.

WEP Authentication

Open System Authentication (OSA) – this methods grants access to station authentication requested based on the configured access policy.

Shared Key Authentication (SKA) – This method sends to an encrypted challenge to the station requesting access. The station encrypts the challenge with its key then responds. If the encrypted challenge matches the AP value, then access is granted.

WEP Weakness

WEP has significant design flaws and vulnerabilities.

• The integrity of the packets is checked using Cyclic Redundancy Check (CRC32). CRC32 integrity check can be compromised by capturing at least two packets. The bits in the encrypted stream and the checksum can be modified by the attacker so that the packet is accepted by the authentication system. This leads to unauthorized access to the network.
• WEP uses the RC4 encryption algorithm to create stream ciphers. The stream cipher input is made up of an initial value (IV) and a secret key. The length of the initial value (IV) is 24 bits long while the secret key can either be 40 bits or 104 bits long. The total length of both the initial value and secret can either be 64 bits or 128 bits long.The lower possible value of the secret key makes it easy to crack it.
• Weak Initial values combinations do not encrypt sufficiently. This makes them vulnerable to attacks.
• WEP is based on passwords; this makes it vulnerable to dictionary attacks.
• Keys management is poorly implemented. Changing keys especially on large networks is challenging. WEP does not provide a centralized key management system.
• The Initial values can be reused

Because of these security flaws, WEP has been deprecated in favor of WPA

WPA

WPA is the acronym for Wi-Fi Protected Access. It is a security protocol developed by the Wi-Fi Alliance in response to the weaknesses found in WEP. It is used to encrypt data on 802.11 WLANs. It uses higher Initial Values 48 bits instead of the 24 bits that WEP uses. It uses temporal keys to encrypt packets.

WPA Weaknesses

• The collision avoidance implementation can be broken
• It is vulnerable to denial of service attacks
• Pre-shares keys use passphrases. Weak passphrases are vulnerable to dictionary attacks.

How to Crack WiFI (Wireless) Networks

WEP cracking

Cracking is the process of exploiting security weaknesses in wireless networks and gaining unauthorized access. WEP cracking refers to exploits on networks that use WEP to implement security controls. There are basically two types of cracks namely;

• Passive cracking– this type of cracking has no effect on the network traffic until the WEP security has been cracked. It is difficult to detect.
• Active cracking– this type of attack has an increased load effect on the network traffic. It is easy to detect compared to passive cracking. It is more effective compared to passive cracking.

WEP Cracking (Hacking) Tools

• Aircrack– network sniffer and WEP cracker. This WiFi password hacker tool can be downloaded from http://www.aircrack-ng.org/
• WEPCrack– this is an open source Wi-Fi hacker program for breaking 802.11 WEP secret keys. This WiFi hacker app for PC is an implementation of the FMS attack. http://wepcrack.sourceforge.net/
• Kismet– this WiFi password hacker online detects wireless networks both visible and hidden, sniffer packets and detect intrusions. https://www.kismetwireless.net/
• WebDecrypt– this WiFi password hack tool uses active dictionary attacks to crack the WEP keys. It has its own key generator and implements packet filters for hacking WiFi password. http://wepdecrypt.sourceforge.net/

WPA Cracking

WPA uses a 256 pre-shared key or passphrase for authentications. Short passphrases are vulnerable to dictionary attacks and other attacks that can be used to crack passwords. The following WiFi hacker online tools can be used to crack WPA keys.

• CowPatty– this WiFi password cracker tool is used to crack pre-shared keys (PSK) using brute force attack. http://wirelessdefence.org/Contents/coWPAttyMain.htm
• Cain & Abel– this WiFi hacker for PC tool can be used to decode capture files from other sniffing programs such as Wireshark. The capture files may contain WEP or WPA-PSK encoded frames. https://www.softpedia.com/get/Security/Decrypting-Decoding/Cain-and-Abel.shtml

General Attack types

• Sniffing– this involves intercepting packets as they are transmitted over a network. The captured data can then be decoded using tools such as Cain & Abel.
• Man in the Middle (MITM) Attack– this involves eavesdropping on a network and capturing sensitive information.
• Denial of Service Attack– the main intent of this attack is to deny legitimate users network resources. FataJack can be used to perform this type of attack. More on this in article

Cracking Wireless network WEP/WPA keys

It is possible to crack the WEP/WPA keys used to gain access to a wireless network. Doing so requires software and hardware resources, and patience. The success of such WiFi password hacking attacks can also depend on how active and inactive the users of the target network are.

We will provide you with basic information that can help you get started. Backtrack is a Linux-based security operating system. It is developed on top of Ubuntu. Backtrack comes with a number of security tools. Backtrack can be used to gather information, assess vulnerabilities and perform exploits among other things.

Some of the popular tools that backtrack has includes;

• Metasploit
• Wireshark
• Aircrack-ng
• NMap
• Ophcrack

Cracking wireless network keys requires patience and resources mentioned above. At a minimum, you will need the following tools

A wireless network adapter with the capability to inject packets (Hardware)

• Kali Operating System. You can download it from here https://www.kali.org/downloads/
• Be within the target network’s radius. If the users of the target network are actively using and connecting to it, then your chances of cracking it will be significantly improved.
• Sufficient knowledge of Linux based operating systems and working knowledge of Aircrack and its various scripts.
• Patience, cracking the keys may take a bit of sometime depending on a number of factors some of which may be beyond your control. Factors beyond your control include users of the target network using it actively as you sniff data packets.

How to Secure wireless networks

In minimizing wireless network attacks; an organization can adopt the following policies

• Changing default passwords that come with the hardware
• Enabling the authentication mechanism
• Access to the network can be restricted by allowing only registered MAC addresses.
• Use of strong WEP and WPA-PSK keys, a combination of symbols, number and characters reduce the chance of the keys been cracking using dictionary and brute force attacks.
• Firewall Software can also help reduce unauthorized access.

How to Hack WiFi Password

In this practical scenario, we are going to learn how to crack WiFi password. We will use Cain and Abel to decode the stored wireless network passwords in Windows. We will also provide useful information that can be used to crack the WEP and WPA keys of wireless networks.

Decoding Wireless network passwords stored in Windows

Step 1) Download the Cain and Abel tool

• Download Cain & Abel from the link provided above.
• Open Cain and Abel

Step 2) Select the Decoders tab and choose Wireless passwords

• Ensure that the Decoders tab is selected then click on Wireless Passwords from the navigation menu on the left-hand side
• Click on the button with a plus sign

Sitecom Wifi Password Cracker

Step 3) The passwords will be shown

• Assuming you have connected to a secured wireless network before, you will get results similar to the ones shown below

Step 4) Get the passwords along with encryption type and SSID

• The decoder will show you the encryption type, SSID and the password that was used.

Summary

• Wireless network transmission waves can be seen by outsiders, this possesses many security risks.
• WEP is the acronym for Wired Equivalent Privacy. It has security flaws which make it easier to break compared to other security implementations.
• WPA is the acronym for Wi-Fi Protected Access. It has security compared to WEP
• Intrusion Detection Systems can help detect unauthorized access
• A good security policy can help protect a network.

https://cdn.guru99.com/images/logo/favicon1.icohttps://www.guru99.com/how-to-hack-wireless-networks.html

RouterPassView v1.90 - Recover lost password from router backup file Copyright (c) 2010 - 2020 Nir Sofer

See Also

Description

Most modern routers allow you to backup the configuration of the router into a file,and then restore the configuration from the file when it's needed.

The backup file of the router usually contains important data like your ISP user name/password,the login password of the router, and wireless network keys.
If you lost one of these password/keys, but you still have a backup file of your routerconfiguration, RouterPassView might help you to recover your lost password from your router file.

System Requirements

• This utility works on any version of Windows, starting from Windows 2000 and up to Windows 10.
• RouterPassView supports limited number of router models. See below.

Download links are on the bottom of this page

Versions History

• Version 1.90:
  • Added new display mode: 'Router File Information' (F6). When you choose this display mode, RouterPassView displays additional information about how the file is encrypted, including File Type, Encrypted Data Start Position, Encryption Algorithm, Encryption Key, Encryption IV, Compression. Be aware that encryption and compression information is displayed only for routers that use standard encryption/compression algorithms.
  • This feature might be useful for people with programming knowledge who want to 'play' with encrypting and decrypting the router file.
• Version 1.88:
  • Fixed bug with file of NETGEAR R7000 - RouterPassView displayed only small part of the file.
• Version 1.87:
  • RouterPassView now decrypts the encrypted strings in some of the Huawei HGxxx routers.
  • Added support for Speedport-W724V.
  • Added support for Huawei HG655d
• Version 1.86:
  • Added support for Huawei HG531s V1.
• Version 1.85:
  • Added support for Huawei HG531/HG532/HG658 routers and possibly other Huawei routers.
• Version 1.81:
  • Fixed bug with decompressing some of the TP-Link Archer files.
• Version 1.80:
  • Added support for ZTE models with AES encryption that use the serial number as encryption key (Like ZXHN H298A).You have to type the serial number in the Advanced Options window (F9).
• Version 1.75:
  • Added support for multiple ZTE models with AES encryption, including H108N, H118N, H267N, H298N, H168N, and possibly more...
• Version 1.72:
  • When RouterPassView manages to detect a router file and decrypt it, the file type code is now displayed in the bottom status bar (See the 'Detected File Type' section for more information)
• Version 1.71:
  • Added support for TP-LINK TL-WR842N and Mercury MW325R (In Ascii Text Mode).
• Version 1.70:
  • Added support for D-Link L7-N-R2000 (In Ascii Text Mode).
  • Added support for D-Link DIR-615, DSL-2730U, and possibly other models (In Ascii Text Mode).
• Version 1.65:
  • Fixed bug with some ZTE routers: RouterPassView decompressed only the first compressed block, so only a part of the file was displayed.
• Version 1.63:
  • Fixed the Ascii Text Mode to display properly router files that contain many null characters.
• Version 1.62:
  • Added support for another version of rom-0/Hdbgarea file format (Zyxel P-2612HWU-F1 Modem).
• Version 1.61:
  • Added support for LevelOne WBR-3406TX v2 and possibly other routers (with DDC6031 and ZXL6031 signatures)
• Version 1.60:
  • Added support for decompression of rom-0/Hdbgarea file format, which is used in multiple routers, including Huawei Echolife HG510a/HG520s/HG520b/HG520c, TP-LINK TD-W8901N, TP-LINK TD-8816, TP-LINK TD-W8901G, TP-LINK TD-W8951ND, TP-LINK TD-8817, SmartAX MT880a/MT880d/MT882a, Zyxel AMG1302, and possibly others.Be aware that in table mode, only the login password of the router is displayed, but you can find all other data if you switch to Hex Dump mode.
• Version 1.57:
  • Added 'Export To Raw Decrypted File' option.
• Version 1.56:
  • Added support for TP-LINK Archer D5 (Only in Ascii text mode).
• Version 1.55:
  • Added support for TP-LINK Archer C2 (Only in Ascii text mode).
• Version 1.54:
  • Added support for NETGEAR DEVG2020 (Only in Ascii text mode).
• Version 1.53:
  • Added support for Linksys WRV200 (Base64 encoded file) - Hex Dump mode only.
• Version 1.52:
  • Added support for ipTIME N604V (Hex Dump mode only)
• Version 1.51:
  • Added support for NETGEAR WGR614v9, WNR1000v3, WNR3500L, and possibly other models.
• Version 1.50:
  • Added support for routers that use zlib compression with 78DA header.
• Version 1.48:
  • Added /RouterWeb command-line option, which opens the Web interface of the router in the default Web browser.
• Version 1.47:
  • Added support for DD-WRT files (nvrambak.bin). You can view the entire file in name=value format, on Ascii text mode.
• Version 1.46:
  • Added generic support for xml files with Base64 encoding, like in TP-Link TD-W8960N router.
• Version 1.45:
  • Added generic support for simple XOR/Add encryption. (Works on HuaWei-3Com Aolynk BR104 and probably other routers)
  • The Find dialog-box now also works on the text modes.
• Version 1.42:
  • Added support for HuaWei HG526.
  • The opened router filename is now displayed in the window title.
• Version 1.41:
  • Added support for D-Link DIR-600 (Only in Ascii text mode)
• Version 1.40:
  • Added support for D-Link DI-524 (firmware versions 2.x and 3.x), D-Link DI-624+A, and otherrouters with DLB6061 / DLB6031 signature.
• Version 1.39:
  • Fixed a bug with decryption of Asus routers (Asus RT-N10+, Asus RT-N56U, and others)
• Version 1.38:
  • Added support for Asus RT-N10+ , and possibly other routers with the same encryption.
• Version 1.37:
  • Added support for HuaWei EchoLife HG520 (In Ascii Text Mode), and possibly other routers with the same encryption.
• Version 1.36:
  • Added support for D-Link DIR-615 G2.
• Version 1.35:
  • Added support for TP-LINK TL-WR700N, advanced versions of TL-WR340G, and probably other TP-LINK routers.
• Version 1.33:
  • Imporved (again) the detection of Edimax routers.
• Version 1.32:
  • Added support for multiple TP-LINK routers, including TL-WR841N, TL-WR841DN, TL-MR342, TL-WR340G, TL-R460, and probably other models.
• Version 1.31:
  • Added support for decrypting the passwords of Linksys/Cisco RV042.
• Version 1.30:
  • Imporved the detection of Edimax routers.
• Version 1.29:
  • Added 'Open Router Web Interface' option (Ctrl+W), which allows you to easily openthe Web interface of your router with your default Web browser.
• Version 1.28:
  • Added support for more NETGEAR router models.
• Version 1.27:
  • Added generic support (in Hex Dump mode) for router files that are encrypted with XOR 0xff, like Thomson TG580 DSL.
• Version 1.26:
  • Added 'Copy Password/Value' option to easily copy only the password or wireless keyinto the clipboard.
• Version 1.25:
  • Added support for D-Link DSL-604T and other models that their config file begins with LMMC signature.
  • Added generic support for router files that are compressed with Deflate compression algorithm. (only on Ascii and Hex Dump modes)
• Version 1.20:
  • Added /sascii command-line option - Save the decrypted router file as Ascii text file.
  • Added /shex command-line option - Save the decrypted router file as hex-dump text file.
  • Added /sraw command-line option - Save the decrypted router file as raw binary file.
• Version 1.16:
  • Added support for other versions of Edimax router file - currently only in Hex Dump mode.
  • When you open a file that RouterPassView can decrypt, but it cannot locate the exact passwords location,it'll automatically switch to Hex Dump mode, so you'll be able to try locating the password in the decrypted Hex Dump.
• Version 1.15:
  • Added command-line support.
  • Fixed issue: Removed the wrong encoding from the xml string, which caused problems to some xml viewers.
• Version 1.10:
  • Added 'Grab Password From IE Window' option - Allows you to open the router configuration interface in Internet Explorer, and then grab the password stored inside the password text-box of the router Web page.
• Version 1.05:
  • Added support for D-Link DIR-300, and possibly similar models.
• Version 1.04:
  • Added support for Sitecom WL-351, and possibly other models.
• Version 1.03:
  • Fixed bug: user names of D-Link routers were wrong.
• Version 1.02:
  • Added support for D-Link DIR-655, and possibly other models (with gateway_settings.gws filename)
  • Added support for Sanex SA 5100, and possibly other models.
  • Fixed bug: Copy to clipboard (Ctrl+C) was disabled in text mode.
• Version 1.01:
  • Added support for Tomato firmware.
  • Added the password of 'support' user for D-Link DSL-2540U and possibly other routers.
• Version 1.00 - First release.

Supported Routers

Due to large amount of router models available in the market, it's impossible to support all of them.
For now, RouterPassView supports a limited number of router models, and I'll gradually add support for more routers in future versions.Also, be aware that even if your router is not in the list, you can still try to openyour router backup file with RouterPassView, because some routers are sold with different brand name, but they still use the same software/chipset of other routers.

Here's the list:

• Linksys WRT54GL (With original firmware or Tomato firmware), WRT54G (only some of them), WRT160N, WRT320N, and possibly similar models.
• Linksys E5200
• Linksys E1200
• Linksys E2000
• Linksys RV082
• Linksys E2500
• Linksys N1500
• Linksys E900
• Cisco-Linksys E4200
• Cisco Linksys E1000 v2.1
• Edimax BR6204WG, and possibly similar models.
• Siemens ADSL SL2-141, and possibly similar models.
• Siemens CL-110 PSTN ADSL2+
• Dynalink RTA1025W, and possibly similar models.
• NETGEAR WGT624, WGR614v9, WNR1000v3, WNR3500L, and possibly other models.
• NETGEAR DEVG2020
• ASUS WL-520g, WL-600g, and possibly similar models.
• ASUS RT-N10+ , and possibly similar models.
• Asus RT-N56U , and possibly similar models.
• Asus RT-AC66U
• Asus RT-AC68U
• Asus RT-AC68W
• Asus RT-N66U
• Asus RT-N12+
• Asus DSL-N14U
• D-Link DIR-655, DIR-300, and possibly similar models.
• Sanex SA 5100, and possibly similar models.
• Sitecom WL-351, WL-575, WL-312, and possibly similar models.
• COMTREND 536+ (Only Internet Login)
• US Robotics 9108 ADSL (internet login and admin login)
• D-Link DSL-2540U/BRU/D ADSL2+, DSL-2650U, DSL-520B
• D-Link DVA-G3170i/PT
• D-Link DSL-604T
• D-Link G3670B
• D-Link DSL-2640T
• D-Link DSL-G684T
• D-Link DSL-2500U
• D-Link 2740B
• D-Link DIR-615 G2
• D-Link WBR-1310
• D-Link DSL-2543B
• D-Link DI-524
• D-Link DI-624+A
• D-Link DIR-600
• D-Link DIR-300
• D-Link DSL-2780
• D-Link DIR-605L
• D-Link DIR-865L
• D-Link DSL-2750U
• D-Link L7-N-R2000
• D-Link DIR-615
• D-Link DIR-859
• D-Link DSL-2730U
• D-Link DSL-2877AL
• TL-WDR4300 N750
• TP-Link TD-8810 ADSL Modem/Router.
• Dynamode R-ADSL-C4-W-G1
• NetComm NB5Plus4 DSL
• Thomson TG580 DSL (only in Hex Dump mode)
• Asus RT-G31
• HuaWei EchoLife HG520
• Huawei Echolife HG510a/HG520s/HG520b/HG520c
• HuaWei HG526
• HuaWei-3Com Aolynk BR104
• Huawei HG531
• Huawei HG532
• Huawei HG658
• Huawei HG655d
• Huawei HG633
• Vodafone HG659
• TP-LINK TL-WR841N
• TP-LINK TL-WR841DN
• TP-LINK TL-WR842N
• TP-LINK TL-MR342
• TP-LINK TL-WR340G
• TP-LINK TL-R460
• TP-LINK TL-WR741ND v2.0
• TP-LINK TL-WR700N
• TP-LINK TL-WR740N
• TP-LINK TL-WA801N
• TP-LINK TL-WR541G
• TP-LINK TL-WR1043ND
• TP-LINK TD-W8960N
• TP-Link TL-WR941ND
• TP-Link TL-MR3220
• TP-Link TL-WR642G
• TP-Link TL-WDR3320
• TP-Link TL-WDR3600
• TP-LINK TL-WR720N
• TP-Link TD-W8970
• TP-LINK TD-W8901N
• TP-LINK TD-8816
• TP-LINK TD-W8901G
• TP-LINK TD-W8951ND
• TP-LINK TD-8840
• TP-LINK TD-8817
• TP-LINK TD-W8968 V2
• TP-LINK TD-W9970
• TP-LINK TL-WR845N
• TP-LINK Archer C2
• TP-LINK Archer D5
• TP-LINK Archer D9
• TP-LINK Archer C9
• TP-LINK Archer C5
• TP-LINK Archer C7
• TP-LINK Archer MR200 AC750
• Belkin N+ (F5D8236uk4)
• Mercury MW54R
• Netgear AC5300 Nighthawk X8 (R8500)
• Netgear AC1750 Smart WiFi Router (R6300)
• Netgear Nighthawk AC1900 (R7000)
• Netgear N900 WiFi Dual Band Gigabit Router (WNDR4500)
• Netgear DG632
• Netgear Wireless Cable Voice Gateway CG3000/CG3100
• Netgear WNDR4000 (Rev 1)
• Netgear WNR2000v2
• Netgear V7610
• Netcomm NB6W
• Aztech DSL605EW
• Comtrend CT-5072T ADSL2+ modem/router
• Small Business RV042
• Intelbras WRN240
• ipTIME N604V
• Linksys WRV200
• Sagem F@ST2404
• ZTE ZXV10
• ZTE ZXHN H108N
• ZTE ZXHN H118N
• ZTE ZXHN H267N
• ZTE ZXHN H298N
• ZTE ZXHN H168N
• ZTE ZXHN F660
• ZTE ZXHN H298A
• ZTE ZXHN H267A V1.0
• ZTE H268A
• SmartAX MT880a/MT880d/MT882a
• Zyxel AMG1302
• Zyxel P-2612HWU-F1
• ZyXel NBG-418N
• Alcatel Lucent I-240W-A
• Alcatel Lucent G-240W-B
• LevelOne WBR-3406TX v2
• MSI RG54SE II
• Mercury MW325R
• SmartRG SR555AC
• Speedport W724V

If you have router model that is not listed here, and you managed to recover your password with RouterPassView, please report about it to nirsofer@yahoo.com and specify the exact model name.

Using RouterPassView

RouterPassView doesn't require any installation process or additional DLL files.In order to start using it, simply run the executable file - RouterPassView.exe
After running RouterPassView, you can open your router configuration file by using 'Open Router Config File'option (Ctrl+O) or by dragging the config file from Explorer into the main window of RouterPassView.

Sitecom Wifi Password Crackers

If RouterPassView manage to detect and decrypt your router file, you should get a list ofpasswords/wireless keys in the main window of RouterPassView. If RouterPassView cannot detect your file,it'll remain empty.

Text Mode (Ascii and Hex Dump)

If RouterPassView shows you a list of passwords, but you can't find the password or other data that you need,you may try to locate your password by switching to Ascii Text Mode (F3) or Hex Dump Text Mode (F4).
In these modes, RouterPassView decrypts the router file, but display it 'as is' withoutanalyzing the data stored in it.

How to submit a config file

If you have a router config file that RouterPassView cannot decrypt and analyze, you are welcomed to send the sample config file to nirsofer@yahoo.com, and I'lltry to figure out how to read it and add support for this file in future version.

Notice: In the recent years, many routers use 3DES or AES algoritm with secret encryption key stored inside the router's firmware. In order to decrypt these files, the firmware of the router is needed, so if you have the firmware file or a link to download it, pleasesend it with the sample config file.

You can also increase the chance of my ability to detect the encryption of the config file, by sending 2 config files with a small change in the configuration.

Detected File Type

Starting from version 1.72, RouterPassView displays the detected file type in the bottom status bar.
Here's the list of all possible file types:

• 1 - Linksys WRTxxx routers
• 2 - Edimax routers with DS0 signature
• 3 - Siemens routers (File begins with <psitree> )
• 4 - Asus routers (HDR1 signature)
• 5 - Netgear unencrypted
• 6 - Tomato firmware
• 7 - Sanex routers
• 8 - D-Link routers (1)
• 9 - Sitecom routers
• 10 - D-Link routers (2)
• 11 - D-Link routers (3)
• 12 - Linksys routers (R31P Signature)
• 13 - Routers with LMMC Signature
• 14 - TP-Link Routers (1)
• 15 - TP-Link Routers (2)
• 16 - Simple encryption - add 0x80 to every byte
• 17 - Asus (RT-N10 and some other models)
• 18 - Routers with DLB/DDC/ZXL signature
• 19 - HuaWei HG526 and some similar models
• 20 - DD-WRT firmware
• 21 - Netgear DES Encryption
• 22 - Netgear file with 'encryptionnQP' signature
• 23 - TP-Link Routers (3)
• 24 - Routers with Hdbgarea signature (1)
• 25 - Routers with Hdbgarea signature (2)
• 26 - D-Link routers (4)
• 27 - D-Link routers (5)
• 28 - TP-Link Routers (4)
• 29 - ZTE AES Encryption (1)
• 30 - ZTE AES Encryption (2)
• 31 - Huawei HGxxx AES Encryption
• 100 - Generic gzip compression
• 101 - Generic deflate compression
• 102 - XOR with 0xff
• 103 - generic XOR
• 104 - generic add
• 105 - generic XML (unencrypted)
• 106 - Base64

Using the 'Grab Password From IE Window' option

If you try to recover your ISP/ADSL/L2TP/PPTP/PPPOE/DDNS password, but RouterPassView cannot decrypt the configuration file of your router,you still have a chance to retrieve the password by using this feature, assuming that you have thelogin password of your router.

In order to use this feature, follow the instructions below.

Wifi Password Crack Free Download

1. Login into your router Web interface with Internet Explorer, and go to the password pagethat you wish to recover. This password page may look like this one:
   As you can see in the above screenshot, the password field is filled with bullets, but if thispassword field really contains the password, RouterPassView will be able to extract it and display it on the main window.
2. Go to the File menu, and choose 'Grab Password From IE Window' or simply press Ctrl+G
3. If the router Web page store the password in the password field, RouterPassView will displaythe hidden password:
   

   Be aware that some routers deliberately store wrong password in this field, and in for these routers, RouterPassView won't be able to recover your real password.

Command-Line Options

/RouterWeb	Opens the Web interface of the router in the default Web browser.
/stab <Filename>	Save the list of router passwords into a tab-delimited text file.
/stabular <Filename>	Save the list of router passwords into a tabular text file.
/sverhtml <Filename>	Save the list of router passwords into HTML file (Vertical).
/sascii <Filename>	Save the decrypted router file as Ascii text file.(Similar to the Ascii Text Mode)
/sraw <Filename>	Save the decrypted router file as raw binary file, Which means that the file is decrypted and then saved 'as is' without any processing.

Translating RouterPassView to other languages

In order to translate RouterPassView to other language, follow the instructions below:

1. Run RouterPassView with /savelangfile parameter:
   RouterPassView.exe /savelangfile
   A file named RouterPassView_lng.ini will be created in the folder of RouterPassView utility.
2. Open the created language file in Notepad or in any other text editor.
3. Translate all string entries to the desired language.Optionally, you can also add your name and/or a link to your Web site. (TranslatorName and TranslatorURL values) If you add this information, it'll be used in the 'About' window.
4. After you finish the translation, Run RouterPassView, and all translated strings will be loaded from the language file.
   If you want to run RouterPassView without the translation, simply rename the language file, or move it to another folder.

License

This utility is released as freeware. You are allowed to freely use it at your homeor in your company. However, you are not allowed to make profit from this software or tocharge your customers for recovering their passwords with this software, unless you got a permission from the software author.
You are also allowed to freely distribute this utility via floppy disk, CD-ROM, Internet, or in any other way, as long as you don't charge anything for this. If you distribute this utility, you must include all files inthe distribution package, without any modification !

Disclaimer

The software is provided 'AS IS' without any warranty, either expressed or implied,including, but not limited to, the implied warranties of merchantability and fitnessfor a particular purpose. The author will not be liable for any special, incidental,consequential or indirect damages due to loss of data or any other reason.

Feedback

If you have any problem, suggestion, comment, or you found a bug in my utility, you can send a message to nirsofer@yahoo.com

Download RouterPassView

RouterPassView is also available in other languages. In order to change the language of RouterPassView, download the appropriate language zip file, extract the 'routerpassview_lng.ini', and put it in the same folder that you Installed RouterPassView utility.

Language	Translated By	Date	Version
Arabic	Mohamed.Bajdouai	03/06/2015	RouterPassView v1.57
Armenian	Եղիազարյան Կարեն	20/06/2011	1.28
Brazilian Portuguese	Paulo Guzmán	27/07/2012	1.40
Czech	Buchtič	18/07/2012	1.40
Dutch	Jan Verheijen	20/10/2020	1.90
French	PasswordOne/Largo	26/08/2018	1.75
Galician	Xosé Antón Vicente Rodríguez	11/06/2010	1.00
German	«Latino» auf WinTotal.de	21/10/2020	1.90
Greek	geogeo.gr	18/06/2011	1.29
Hebrew	peterg	05/08/2011	1.33
Hungarian	StormChild	17/02/2011	1.27
Indonesian	KevNet 09-JKT	12/03/2014	1.52
Italian	Alessandro Viscone	20/04/2018	1.72
Italian	Andrea Carli	03/09/2018	1.75
Persian	Amirreza Nasiri	11/07/2014	1.53
Polish	Hightower	22/10/2020	1.90
Polish	KartsAnd	04/06/2010	1.03
Romanian	Jaff (Oprea Nicolae)	05/02/2016	1.62
Russian	Dmitry Yerokhin	20/10/2020	1.90
Simplified Chinese	至天 (Max Sky)	06/01/2020	1.88
Simplified Chinese	李柏均 (Localized by Bojun Li)	28/02/2014	1.52
Simplified Chinese	Shelling	16/01/2021	1.90
Slovak	František Fico	27/10/2020	1.90
Slovenian	Jadran Rudec, jrudec@gmail.com	05/01/2021	1.90
Traditional Chinese	Danfong Hsieh	21/10/2020	1.90
Traditional Chinese	Hulen (破滅刃)	05/05/2013	1.47
Thai	น้องพร WiFi ค่ะ	04/08/2013	1.47
Turkish	Cemil Kaynar	27/04/2017	1.70
Ukrainian	Ihor Maydanovich	09/04/2013	1.46
Valencian	vjatv	24/05/2010	1.00